Diamond Floor Grinder

Diamond Floor Grinder

The diamond floor grinder is used to even & prepare concrete surfaces for epoxy coatings and floor paints. Quite often when new concrete surfaces are installed there are bumps and diverts within the surface, this machine is perfect for removing those imperfections from the surfaces. The machine can also be used for other jobs such as removing hard dirt in concrete surfaces.

This machine has a 32 amp 110V plug. This means that the 7 KVA transformer is needed to power the machine and also due to the high start-up ampage a good electrical supply is needed to run the machine. NO extension leads can be used with this machine.

The machine also has a dust extractor attachment which can be used with any industrial dust extractor that has a hose or hose end with a 50 mm outside diameter. We can provide an industrial dust extractor at an extra charge.

Technical Specifications & Uses

  • For grinding off concrete & laitance
  • Prepping epoxy & latex
  • Smoothing out trowel marks
  • Resurfacing old concrete & slabs
  • Taking off concrete surface laitance
  • Speed: 1400rpm
  • Motor Size: 2.2kW
  • Start Up: 5kW
  • Weight: 65kg
  • Size: W x L x H (32 x 60 x 100)
  • Disc Diameter: 250mm
  • Vibration level: 6.5m/s
  • Noise level: 79 dBA
  • Input Voltage: 110v 32A

This machine can be collected using a large car or any larger vehicle, however, this machine is very heavy and is a two man lift. Our members of staff can assist you with loading the machine in your vehicle when collected but another person will have to help you with the other end.

Safety Equipment Required:

Protective Gloves, Safety Footwear & Eye protection.


1 Day: £75.60 + VAT

2 Day: £94.50 + VAT

3 Day: £107.10 + VAT

Week: £126.00 + VAT

Extra Days: £25.20 + VAT

Deposit: £200.00 (Card Only)

*Deposit amount may vary depending on the length of hire

Wear Charge per 1/2 mm (Minimum of 1/2mm Charged)

£30.00 + VAT

Comments are closed.